12/30/15

My jewellery bench is finally functional.

11/2/15

Hydraulic press, presse hydraulique

I used 120mm U channel for the frame and a 15 ton jack. Welded with 7018 electrodes.

9/15/15

Pendant for Jena

This Labradorite was provided by a friend to be set as a pendant.

9/14/15

New chapter in Reunion Island


Relocation to Reunion Island. I have just finished setting up my new workshop. On est venu s'installer dans l'île de la Réunion. Je viens juste de finir de remonter mon nouvel atelier.

9/4/14

Wooden crates, malles bois

I have been busy the past few months building wooden chests for storage. They are made with recycled wood that I reclaim in my neighborhood in Shatin. We are planning to leave Hong Kong and move to Reunion Island.


7/15/14

Titanium Saturn earrings, B.O. titane saturne

Made out of 1mm Titanium sheet. Coloured with my torch flame. To obtain the blue and the yellow I have to heat it twice with different temperatures. Hooks in 18K gold.

4/14/14

T-nuts, écrous en T

T-nuts for rotary table, écrou de bridage pour table rotative.

3/28/14

Cutting silver washers, découpe rondelles argent

I made myself a centering tool in brass to place the hole right in the middle. Je me suis fait une pige en laiton. Ca m'aide à avoir une découpe bien centrée.

3/23/14

Welding a stand for my bender, socle pour cintreuse

Pipe 4x36x2/8", top plate 5x8x1/2", bottom plate 8x8x1/2". Welded with 6010 and 7018 rods. Tube de 100x910x6mm, plaque du haut 120x200x12mm, base 200x200x12. Soudé à l'arc avec baguettes 6010 et 7018.

3/20/14

Leather edge burnisher, brunissoir pour cuir

The spool is made of tropical fruit wood. Le disque est fait en bois de longani.

3/17/14

Slitting saw

Making a sleeve for my 20mm boring bar.

3/16/14

Foot pegs, repose-pieds

Fly cutter

Fly cutting a steel bar on the Arboga mill.

2/24/14

Titanium wedding bands, alliances titane



Titanium wedding bands for Isabelle and Iain. Size 13 and 16. Width 4 and 6 mm

2/13/14

Ring mandrel, triboulet spécial

Special order for Ben. With this tool he plans to form his leather rings.



1/21/14

Quick change tool post

New quick change tool post for my lathe. I have bought it at CTC Tools. I highly recommend this company for chinese machining tools. 
http://www.ctctools.biz/servlet/StoreFront

1/3/14

To my readers

I want to take the opportunity to thank those who visit this blog and follow my different projects in the workshop. Over the years, the visits have increased regularly and you are more and more to read it. I hope that for the coming year you will enjoy popping by.

12/29/13

Gear cutter

This fly cutter holds a 8mm round tool bit.